6.4273.0 KAESER oil separation filter

The 6.4273.0 KAESER oil separation filter is mainly used for separating and filtering non clean compressed air from the air compressor, which hides large and small oil droplets. The moisture inside can cause rust on the compression components and shorten the service life of the equipment. The performance of this 6.4273.0 filter element is to improve the cleanliness of compressed air, and the filter element can be interchanged with the original filter element.

The compressed air coming out of the air compressor carries oil droplets of all sizes. Large oil droplets are easy to separate through the oil gas separator, while small oil droplets (suspended oil particles) must be filtered through the micron level fiberglass filter layer of the oil gas separator. We use more advanced anti-corrosion and efficient Microfiber cohesive material as the filter body. The filter bed of the filter element of this system is composed of pre filter layer, Microfiber layer, support layer, filter layer and gravity sedimentation layer, so that the output air of the compressor is μ Solid particles above m can be completely filtered out, while extremely small particles are about 0.01-1 μ The oil-water gas dissolution of m is condensed into larger oil droplets when passing through the filter element, which accumulate at the bottom of the filter element. Then, it is siphoned back to the lubrication system through the return pipe at the concave part of the filter element, allowing the compressor to discharge purer, oil-free compressed air.

6.4248.1 Kaeser air filter element